-
Q
What’s your product?
AWe have full zirconia series including HT/ST/SHT/ST-PLUS/UT white blocks; ST/UT/ST-PLUS preshaded blocks;ST/ST-PLUS/UT and 3D PRO multi-layer. We also provide other milling solution materials such as PEEK,PMMA,WAX,milling burs, fast sintering furnace, glaze/stain kit and digital design service etc.
Interested in learning more about Bloomzir® zirconia blocks and you can ontact Bloomden Bioceramics today to discuss your needs with an experienced
sales representative!
Phone: 86 731 8421 2982
Email: info@bloomden.com
-
Q
What’s your best zirconia block?
A3D Pro is the one with most-natural outlook and SHT is the most cost-effective.
Interested in learning more about Bloomzir® zirconia blocks and you can ontact Bloomden Bioceramics today to discuss your needs with an experienced
sales representative!
Phone: 86 731 8421 2982
Email: info@bloomden.com
-
Q
What’s your best selling zirconia block?
AIt depends on, In Europe/Europe/Russia market, 3D pro is more popular, In Middle East/Asia market, white block sells better.
Interested in learning more about Bloomzir® zirconia blocks and you can ontact Bloomden Bioceramics today to discuss your needs with an experienced
sales representative!
Phone: 86 731 8421 2982
Email: info@bloomden.com
-
Q
What is special about 3D Pro?
AIt has gradual change of strength and translucency from cervical to insicial,mostly close to real teeth, Aesthetically functional.
Interested in learning more about Bloomzir® 3D Pro and you can ontact Bloomden Bioceramics today to discuss your needs with an experienced
sales representative!
Phone: 86 731 8421 2982
Email: info@bloomden.com
-
Q
Do you have 3D Pro with 57% transluency from 750MPa~1100MPa, Do you have something like this?
AYes, we have, do you use Aidite 3D Pro? We have the same product, our 3D Pro is 42% to 49% transluency with 650Mpa to 1100Mpa inciscal to cervical. As all knew that the most translucency of Tosoh powder is 49%. Why Aidite said that they have 57% transluency, because of the test mothed is different.
Interested in learning more about Bloomzir® 3D Pro and you can ontact Bloomden Bioceramics today to discuss your needs with an experienced
sales representative!
Phone: 86 731 8421 2982
Email: info@bloomden.com
-
Q
The temperature of my sintering furnace can only reach 1450 degrees, can sintering your 3D Pro?
AWould you please tell the brand of your sintering furnace? If AG then for sure yes.
Interested in learning more about Bloomzir® 3D Pro and you can ontact Bloomden Bioceramics today to discuss your needs with an experienced
sales representative!
Phone: 86 731 8421 2982
Email: info@bloomden.com
-
Q
What’s your powder material for zirconia blocks?
AThe powder we used is from sinocera,, which is the No.1 zirconia powder manufacturer in China. Its performance can be on a par with Tosoh powder but much better price.
Interested in learning more about Bloomzir® zirconia blocks and you can ontact Bloomden Bioceramics today to discuss your needs with an experienced
sales representative!
Phone: 86 731 8421 2982
Email: info@bloomden.com
-
Q
Regarding the zirconia block strength, is it theoretical or true? Is there any testing?
AYes, it's true and we have testing report.
Interested in learning more about Bloomzir® zirconia blocks and you can ontact Bloomden Bioceramics today to discuss your needs with an experienced
sales representative!
Phone: 86 731 8421 2982
Email: info@bloomden.com
-
Q
What do you have for Bleach color?
ABleach shade is available on ST Plus preshaded with 46% translucent & 900mpa, ST Plus multilayer with 46% translucent & 900mpa, 3D Pro multilayer with 42%-49% translucent & 650-1200mpa gradients.
Interested in learning more about Bloomzir® zirconia blocks and you can ontact
Bloomden Bioceramics today to discuss your needs with an experienced sales
representative!
Phone: +86 731 8421 2982
Email: info@bloomden.com
