3D Pro Multilayer
- Features
- Accessories
- Tech Specs
- Query Information
Features of 3D Pro Multilayer
3D Pro multilayer has been introduced into dental practice as an alternative to metal-ceramic dental restorations. Compared to the traditional porcelain to metal restorations
Consistent VITA® Classic Shade Match
Strictly follow up VITA® Classic Shade from the R & D phase and also by the standard production with shade match.
Glazed with Bloomden CeramStar® Glaze/Stain Kit
Preparation: 3D Pro 3-unit bridge after milled and sintered and then glazed.
Developed an improved flexural strength
The flexural strength of this new material is 650-1100 MPa. These conveniences have made the 3D Pro multilayer zirconia used more and more for crowns and bridges inlateral applications.
Excellent aesthetics performance
Translucency can be regulated by controlling the absorption, reflection, and transmission of light through the material. The translucency is higher when the reluctance is low and the transmission is high.
Compared to previous stage the strength as a trend
Bloomzir® 3D Pro multilayer zirconia is unlike any other zirconia, it can exhibit a strength range from 650MPa to 1100MPa which can cover posteriors and anteriors for both crowns and bridges including implant restorations.
Monoclinic resistance
Unique hydrolysis microstructure and chemical formulation by the hydrothermal treatment also resist degradation of aging which the cubic shifted to monoclinic state that can be observed in zirconia structure.
High speed sintering cycle
An excellent attributes is the fast sintering cycle which can ensure the strength, translucency and aging resistance simultaneously. The high-productivity sintering cycle allows for “inside furnace” time in 45 minutes.
Low Wear Rate
The average crystalline size of less than 0.5 μm and the Hydrolyzed powder properties are organized inside 3D Pro multilayer zirconia which enable 3D Pro multilayer zirconia to be long-term enamel wear behavior closed to the natural human teeth after several times of lab-test.
Accessories for 3D Pro Multilayer
CeramStar® Glaze/StainGingivalSet
It contains 4 single masses as well as special liquids and accessories. The 3D pastes were specially developed for the aesthetic finalization and characterization of the gingival-colored parts of ceramic restorations, made of lithium disilicate and 3D Pro Multilayer. All parts of the set are also available individually.
LEARN MORE
CeramStar® Glaze/Stain Vivid Set
It contains 7 single masses as well as special liquids and accessories. The 2D pastes were specially developed for the basic aesthetic finalization of the ceramic restorations, made of lithium disilicate and 3D Pro Multilayer. All parts of the set are also available individually.
LEARN MORE
CeramStar® Glaze/Stain Blossom Set
It contains 17 single masses as well as special liquids and accessories. The 2D and 3D pastes and stains were specially developed for the professional aesthetic finalization of ceramic restorations, made of lithium disilicate and 3D Pro Multilayer. All parts of the set are also available individually.
LEARN MORE
3D Pro Multilayer Technical Specifications
| Technical Specifications | |
|---|---|
| 3D Pro Multilayer | |
| ZrO2+HfO2+Y2O3 | ≥99% |
| Y2O3 | 4.5%-10% |
| Al2O3 | ＜0.15% |
| Density before sintering (g.cm-3) | 3.15±0.05 |
| Density after sintering (g.cm-3) | 6.07±0.01 |
| CTE (25-500°C) (K-1) | 10.5±0.5 |
| Flexural strength after sintering (MPa) | 800-1200 |
| Aging surface monoclinic phase content | ＜15% |
| Light transmittance | ＜49% |
| Chemical solubility after sintering (µg.cm-2) | ＜100 |
| Cytotoxicity | 0 Level |
| Radioactivity (Bq.g-1) | ＜0.1 |
| Sintering temperature (°C) | 1480 |
| Systems | 98mm / 95mm / 92*75mm |
| Thickness | 12m / 14mm / 16mm / 18mm 20mm / 22mm / 25mm |
| Shades | A1 A2 A3 A3.5 A4 / B1 B2 B3 B4 C1 C2 C3 C4 / D2 D3 D4 / BL1 BL2 BL3 BL4 |
